Mac McLeanOxfordshire England firstname.lastname@example.org 6/18/2003
The engine is own design twin cylinders horizontal four cycle 1 inch bore and 1
inch stroke.First run in 1999 and I am still trying to get the slow running the
way I want it.
I built this because I had never built an engine with an oil sump and pressure fed main and big end bearings.Oil feed is gear pump it has twin cam shafts and flywheel magneto ignition.It also has twin carbs these are gravity fed float chamber type (copies of the Amal) .If you want to do things the hard way go for twin carbs,high rpm no problem nice smooth tick over lots of problems but I am winning will not be long now.
Copyright 2003, Florida Association of Model Engineers and engine builder as noted above, All rights reserved.