Return To Horizontal Gallery     Next by date    Next Horizontal

Bruce Harr         Kingsport, TN                 havnfun@preferred.com

 1/2 scale 1 1/2 HP John Deere. This engine has a bore of 1.850 in. a stroke of 2.250 in. as built it has 9 in flywheels. It has igniter ignition and is mounted on scale JD truck, the wood is cherry. I built this engine in 1999. This engine runs very well, when warm it will "coast" for about 10 Seconds between hits. 

Copyright 2002,  Florida Association of Model Engineers and engine builder as noted above, All rights reserved.