Return To Multi Cylinder Gallery 

Steve Huck,          Sterling Heights, MI            

Here is one for the non-combustion section if your interested. Behold the quarter sized wobbler Literally! It is 1/4 scale of the wobbler. Someone on one of the yahoo groups wanted some plans of it so i made a set of drawings from that i built. I got bored and scaled it down 4 times and never thought i would build it. The inlet tube is pressed into a hole .047 deep so of course it broke. It is now soldered in and looks bad but works great. Everything is pressed together except one screw that attaches the column to the base.

.093 Bore,  .125 Stroke

Video at










Copyright 2008  Florida Association of Model Engineers and engine builder as noted above, All rights reserved.